Nanaimo By-law 7453, s. 4.6 — , Table 4 and Section 4.8, Table 5

, Table 4 and Section 4.8, Table 5.

Obstructions 4.7

• i. In addition to Table 4, where a Parking Space abuts an obstruction (including but not limited to columns, property lines, walls and fences) that would prevent any door of a vehicle from opening fully, the Parking Space shall:

a. be an additional 0.3 m wider where the Parking Space abuts an obstruction on one side; b. be an additional 0.6 m wider where the Parking Space abuts an obstruction on both sides; c. be an additional 0.8 m wider where the Parking Space abuts a doorway; and d. be measured to the edge of the obstruction closest to the Parking Space. Small Car Spaces 4.8

• i. Notwithstanding Section 4.6, Table 5 establishes the minimum dimensions and design for Small Car Parking Spaces as required within this Bylaw: Bylaw No. 7453 Table 5 - Parking Space Dimensions (Small
• Car) Angle of Parking Spaces Symbol Description 90  Parallel (Figure 1) Space Width A 2.5 m 2.4 m Space Length B 4.6 m 6.7 m Aisle Width C 6.7 m 3.9 m
• ii. A maximum of 50% of the Parking Spaces provided on a Lot may be designated as Small Car Parking Spaces in accordance with the dimension requirements outlined in Table 5. Each Small Car Parking Space shall be clearly identified. iii

Where the design of Small Car Parking Spaces is proposed to be different than the required design and dimensions presented in Table 5 and Sections 4.7 and 4.8, the design of the Parking Lot must be undertaken by a qualified professional to the satisfaction of the Director of Planning & Development or their designate. Location of Parking