Kingston : Règlement no 2003-405, art. 2.8 — Fence By-law
Fence By-law
Vérifié le
Texte indexé
Every gate that forms part of a pool fence shall be supported on substantial hinges, be self-closing, and be equipped with a self-latching device placed at the top and on the inside of the gate, i.e., the side of the gate nearest to the pool.
Extrait court. Le reste du texte est sur la source officielle.
Source officielle · Table des matières
Sujets
Articles voisins
- 2.6 Aids to Climbing No member or attachment that could facilitate climbing shall be attached to the exterior face of a pool fence between 100 millimetres (4 inches) and 1.2 metres (4 feet) above the finished grade
- 2.7 Gates and Entrances Every gate that forms part of a pool fence shall comply with the height requirements set out in sections 2.1 and 2.2 of this Schedule and with the standards for that type of fence established in this Schedule
- 2.9
- 2.10 Where a wall or portion of a wall of any building that is located on the same property as a pool forms part of the pool enclosure, no entrance to the pool area shall be permitted through that wall unless the wall is located no closer than 1.2 metres (4 feet) from the nearest inside wetted surface of the pool wall
Autres villes
Pour signaler une correction : info@bylawinsider.com. Ce lien ouvre votre programme de courriel.
Copie non officielle, pour faciliter la lecture. La version officielle prévaut. Source officielle
Short excerpts of the public bylaw page. The city's page governs.