Markham : Règlement no 2018-90, art. 2.3 — All assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in the course of assembly. Fastenings and locking devices, such as bolts, cap screws, cotter pins, lock washers etc. shall be installed where required for safe operation. Nuts shall be drawn tight, cotters pins shall be spread and lock nuts firmly set. Before being used, all amusement devices shall be anchored so as to be stable under all operating Conditions, by the use of guys, blocking, cribbing, outriggers or other suitable means
Licensing and Regulation of Stationary Businesses By-law
Vérifié le
Texte indexé
All assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in the course of assembly. Fastenings and locking devices, such as bolts, cap screws, cotter pins, lock washers etc. shall be installed where required for safe operation. Nuts shall be drawn tight, cotters pins shall be spread and lock nuts firmly set. Before being used, all amusement devices shall be anchored so as to be stable under all operating Conditions, by the use of guys, blocking, cribbing, outriggers or other suitable means.
Extrait court. Le reste du texte est sur la source officielle.
Source officielle · Table des matières
Articles voisins
- 2.1 All equipment shall be identified by plates stating the manufacturer's name, model number if any, maximum capacity and maximum operating speed for safe operation. If the equipment has been materially rebuilt or modified so as to change its original action, a competent and independent inspection company shall certify that it is structurally adequate to safely withstand all stresses to which it will be subjected during normal operation
- 2.2 All component parts shall be maintained in good condition without visible SIGNS of deterioration, wear or fatigue which could result in their inability to carry out their intended function. All defective parts shall be replaced before operation or use
- 2.4 All replacement materials for defective parts shall be at least equivalent in all respects to the original material
- 2.5 An amusement device shall not be overcrowded, or loaded in excess of its safe carrying capacity, or operated under dangerous weather Conditions
Autres villes
Pour signaler une correction : info@bylawinsider.com. Ce lien ouvre votre programme de courriel.
Copie non officielle, pour faciliter la lecture. La version officielle prévaut. Source officielle
Short excerpts of a public bylaw PDF. The official PDF governs.