Markham By-law 2018-90, s. 2.3 — All assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in the course of assembly. Fastenings and locking devices, such as bolts, cap screws, cotter pins, lock washers etc. shall be installed where required for safe operation. Nuts shall be drawn tight, cotters pins shall be spread and lock nuts firmly set. Before being used, all amusement devices shall be anchored so as to be stable under all operating Conditions, by the use of guys, blocking, cribbing, outriggers or other suitable means
Licensing and Regulation of Stationary Businesses By-law
Last checked
Indexed text
All assembly work shall be performed in a proper and workmanlike manner. Parts shall be properly aligned, and shall not be bent, distorted, cut or otherwise injured to force a fit. Parts requiring lubrication shall be lubricated in the course of assembly. Fastenings and locking devices, such as bolts, cap screws, cotter pins, lock washers etc. shall be installed where required for safe operation. Nuts shall be drawn tight, cotters pins shall be spread and lock nuts firmly set. Before being used, all amusement devices shall be anchored so as to be stable under all operating Conditions, by the use of guys, blocking, cribbing, outriggers or other suitable means.
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Related sections
- 2.1 All equipment shall be identified by plates stating the manufacturer's name, model number if any, maximum capacity and maximum operating speed for safe operation. If the equipment has been materially rebuilt or modified so as to change its original action, a competent and independent inspection company shall certify that it is structurally adequate to safely withstand all stresses to which it will be subjected during normal operation
- 2.2 All component parts shall be maintained in good condition without visible SIGNS of deterioration, wear or fatigue which could result in their inability to carry out their intended function. All defective parts shall be replaced before operation or use
- 2.4 All replacement materials for defective parts shall be at least equivalent in all respects to the original material
- 2.5 An amusement device shall not be overcrowded, or loaded in excess of its safe carrying capacity, or operated under dangerous weather Conditions
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of a public bylaw PDF. The official PDF governs.