Richmond Hill By-law 973, s. 973.7.21 — Gate - clearance - requirements A clearance of 100 mm (3.9 in.) is permitted under gates where a hard surface such as concrete, asphalt, paving stones or patio slabs extends for a distance of 0.5 m (2 in.) on each side of the gate
Last checked
Indexed text
Gate - clearance - requirements A clearance of 100 mm (3.9 in.) is permitted under gates where a hard surface such as concrete, asphalt, paving stones or patio slabs extends for a distance of 0.5 m (2 in.) on each side of the gate.
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Topics
Related sections
- 973.7.19 Metal picket fences - height - exception Metal picket fences need not exceed 1.6 m (4.9 ft.) in height
- 973.7.20 Gate - construction - supports - hinges - substantial Every gate in a swimming pool enclosure shall be supported on substantial hinges and constructed in accordance with the requirements of Sections 973.7.25 and 973.7.26
- 973.7.22 Gate - self-closing Every gate in a swimming pool enclosure shall be self-closing
- 973.7.23 Gate - self-latching - from interior - height Every gate in a swimming pool enclosure shall be equipped with a lockable self-latching device located on the interior face near the top of the gate or on the exterior face provided it is at least 1.5 m (4.9 ft.) above grade
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of a public bylaw PDF. The official PDF governs.