Richmond Hill By-law 973, s. 973.7.20 — Gate - construction - supports - hinges - substantial Every gate in a swimming pool enclosure shall be supported on substantial hinges and constructed in accordance with the requirements of Sections 973.7.25 and 973.7.26
Last checked
Indexed text
Gate - construction - supports - hinges - substantial Every gate in a swimming pool enclosure shall be supported on substantial hinges and constructed in accordance with the requirements of Sections 973.7.25 and 973.7.26.
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Topics
Related sections
- 973.7.18 Climbing - distance from condition - facilitating No swimming pool enclosure shall be located closer than 1.0 m (3.3 ft.) to any condition that facilitates the climbing of the enclosure. In the alternative, the height of the enclosure shall be increased to a minimum height of 1.8 m (5.9 ft.) for a distance of at least 1.0 m (3.3 ft.) on either side of such condition
- 973.7.19 Metal picket fences - height - exception Metal picket fences need not exceed 1.6 m (4.9 ft.) in height
- 973.7.21 Gate - clearance - requirements A clearance of 100 mm (3.9 in.) is permitted under gates where a hard surface such as concrete, asphalt, paving stones or patio slabs extends for a distance of 0.5 m (2 in.) on each side of the gate
- 973.7.22 Gate - self-closing Every gate in a swimming pool enclosure shall be self-closing
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of a public bylaw PDF. The official PDF governs.