Kelowna By-law 10760, s. 2.3 — Description of Interior Building Coverage Requirements Reliable two-way radio communications shall be achieved in the following areas and locations inside the building
Fire and Life Safety Bylaw
Last checked
Indexed text
Description of Interior Building Coverage Requirements Reliable two-way radio communications shall be achieved in the following areas and locations inside the building:
- Table 1 Floor Area for Reliable Communications Floor Area for Reliable Two-Way Location Radio Communications
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Topics
Related sections
- 3.4 has been measured by the U.S. Department of Commerce, National Telecommunications and Information Administration to be approximately equivalent to 16 dB signal to noise and distortion ratio for ETSI DMR 2-slot signals. It may also be approximately equivalent to a received signal level of -95 dBm, including allowances for portable antenna gain and body losses, in the absence of other signals that may affect the receiver
- 2.2 Certified and Desing Signal Strength Thresholds Following the complete construction of the building interior including all exterior and interior walls and all doors and windows installed minimum certified signal strength of -95 dBm shall be obtained in all floor areas as per Table 1
- 1 Public access hallways, elevator lobbies 95% of each area on each floor
- 2 Living areas 95% of each enclosed area within each living area
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of a public bylaw PDF. The official PDF governs.