Kingston : Règlement no 2009-140, art. 4 — The location of Projecting Signs shall comply with the following
Sign By-law
Vérifié le
Texte indexé
The location of Projecting Signs shall comply with the following:
- Projecting Signs or any part of the Sign Structure shall not extend above or beyond the sides of the Building Facade. Projecting Signs may project out perpendicular from the wall of the Building up to a maximum distance of 0.76 metres (2.5 feet) over public property. Projecting Signs shall be a minimum distance of 2.74 metres (9 feet), measured from the bottom of the Sign to Grade. Projecting Sign supports shall not be permitted on public property and shall be a minimum distance of 1 metre (3.3 feet) from the inner edge of a sidewalk, or where there is no sidewalk, 2 metres (6.5 feet) from the back edge of the curb. Projecting Sign supports shall not be permitted on public property.
Extrait court. Le reste du texte est sur la source officielle.
Source officielle · Table des matières
Articles voisins
- 2 Each Projecting Sign area shall not exceed ten percent (10%) of the Building Facade to which the Sign is Displayed and which forms part of the occupants area within the Premise but shall not exceed two square metres (21.5 square feet)
- 3
- 5
- 1 Projected Display Signs shall only be permitted in commercial, development, institutional or industrial type zones as defined by the applicable zoning Bylaw
Autres villes
Pour signaler une correction : info@bylawinsider.com. Ce lien ouvre votre programme de courriel.
Copie non officielle, pour faciliter la lecture. La version officielle prévaut. Source officielle
Short excerpts of the public bylaw page. The city's page governs.