Kingston By-law 2009-140, s. 4 — The location of Projecting Signs shall comply with the following
Sign By-law
Last checked
Indexed text
The location of Projecting Signs shall comply with the following:
- Projecting Signs or any part of the Sign Structure shall not extend above or beyond the sides of the Building Facade. Projecting Signs may project out perpendicular from the wall of the Building up to a maximum distance of 0.76 metres (2.5 feet) over public property. Projecting Signs shall be a minimum distance of 2.74 metres (9 feet), measured from the bottom of the Sign to Grade. Projecting Sign supports shall not be permitted on public property and shall be a minimum distance of 1 metre (3.3 feet) from the inner edge of a sidewalk, or where there is no sidewalk, 2 metres (6.5 feet) from the back edge of the curb. Projecting Sign supports shall not be permitted on public property.
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Related sections
- 2 Each Projecting Sign area shall not exceed ten percent (10%) of the Building Facade to which the Sign is Displayed and which forms part of the occupants area within the Premise but shall not exceed two square metres (21.5 square feet)
- 3
- 5
- 1 Projected Display Signs shall only be permitted in commercial, development, institutional or industrial type zones as defined by the applicable zoning Bylaw
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of the public bylaw page. The city's page governs.