Markham : Règlement no 2015-96, art. 9.1 — Pool Enclosure By-law
Pool Enclosure By-law
Vérifié le
Texte indexé
Every gate in an Enclosure shall be supported on hinges substantial enough to hold the weight of the gate and shall be constructed in accordance with the requirements of subsections 8.2, 8.3, 8.4 or 8.5 and be equipped with a self-closing device and a lockable Self-Latching Device located on the interior face near the top of the gate. 9.2 Metal gates used in an Enclosure shall be equipped with a Covering Plate Device, a minimum of 0.3 m (12 in.) x 0.3 m (12 in.) size, covering the latching device from the outside of the gate. The covering plate device shall be a minimum thickness of 6.3 mm (¼” in.).
Extrait court. Le reste du texte est sur la source officielle.
Source officielle · Table des matières
Articles voisins
- 8.5
- 9.0 Construction of Gates By-law 2015-96
- 9.3 Double gates used in an Enclosure shall have one of the two gates equipped with a Self-Closing Device and a Self-Latching Device to provide access. The other gate shall have a securing device permanently affixed to the ground or other non-moveable object, which prevents access through this gate without lifting or removing this device and then releasing the latch. This gate must be securely closed unless open for access and supervised to prevent unauthorized access to the Pool area
- 10.0 Special Provisions and Partial Exemptions
Autres villes
Pour signaler une correction : info@bylawinsider.com. Ce lien ouvre votre programme de courriel.
Copie non officielle, pour faciliter la lecture. La version officielle prévaut. Source officielle
Short excerpts of a public bylaw PDF. The official PDF governs.