Richmond Hill : Règlement no 973, art. 973.7.20 — Gate - construction - supports - hinges - substantial Every gate in a swimming pool enclosure shall be supported on substantial hinges and constructed in accordance with the requirements of Sections 973.7.25 and 973.7.26
Vérifié le
Texte indexé
Gate - construction - supports - hinges - substantial Every gate in a swimming pool enclosure shall be supported on substantial hinges and constructed in accordance with the requirements of Sections 973.7.25 and 973.7.26.
Extrait court. Le reste du texte est sur la source officielle.
Source officielle · Table des matières
Sujets
Articles voisins
- 973.7.18 Climbing - distance from condition - facilitating No swimming pool enclosure shall be located closer than 1.0 m (3.3 ft.) to any condition that facilitates the climbing of the enclosure. In the alternative, the height of the enclosure shall be increased to a minimum height of 1.8 m (5.9 ft.) for a distance of at least 1.0 m (3.3 ft.) on either side of such condition
- 973.7.19 Metal picket fences - height - exception Metal picket fences need not exceed 1.6 m (4.9 ft.) in height
- 973.7.21 Gate - clearance - requirements A clearance of 100 mm (3.9 in.) is permitted under gates where a hard surface such as concrete, asphalt, paving stones or patio slabs extends for a distance of 0.5 m (2 in.) on each side of the gate
- 973.7.22 Gate - self-closing Every gate in a swimming pool enclosure shall be self-closing
Autres villes
Pour signaler une correction : info@bylawinsider.com. Ce lien ouvre votre programme de courriel.
Copie non officielle, pour faciliter la lecture. La version officielle prévaut. Source officielle
Short excerpts of a public bylaw PDF. The official PDF governs.