Kingston By-law 2009-140, s. 2 — Each Projecting Sign area shall not exceed ten percent (10%) of the Building Facade to which the Sign is Displayed and which forms part of the occupants area within the Premise but shall not exceed two square metres (21.5 square feet)
Sign By-law
Last checked
Indexed text
Each Projecting Sign area shall not exceed ten percent (10%) of the Building Facade to which the Sign is Displayed and which forms part of the occupants area within the Premise but shall not exceed two square metres (21.5 square feet).
Where a Wall Sign or Awning Sign is also advertising for tenants on the same Building Facade; the area of the Projecting Sign shall contribute to the Total Aggregate Area for Wall Signs permitted in schedule W-1.
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Related sections
- 10 The duration of a Sign Permit for a Portable Sign shall be a minimum of thirty days to a maximum of ninety days at which time the Sign Permit shall be subject to renewal
- 1 Projecting Signs shall only be permitted in commercial, industrial, agricultural, rural, development or institutional type zones as defined by the applicable zoning Bylaw
- 3
- 4 The location of Projecting Signs shall comply with the following
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of the public bylaw page. The city's page governs.