Richmond Hill By-law 973, s. 973.7.23 — Gate - self-latching - from interior - height Every gate in a swimming pool enclosure shall be equipped with a lockable self-latching device located on the interior face near the top of the gate or on the exterior face provided it is at least 1.5 m (4.9 ft.) above grade
Last checked
Indexed text
Gate - self-latching - from interior - height Every gate in a swimming pool enclosure shall be equipped with a lockable self-latching device located on the interior face near the top of the gate or on the exterior face provided it is at least 1.5 m (4.9 ft.) above grade.
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Topics
Related sections
- 973.7.21 Gate - clearance - requirements A clearance of 100 mm (3.9 in.) is permitted under gates where a hard surface such as concrete, asphalt, paving stones or patio slabs extends for a distance of 0.5 m (2 in.) on each side of the gate
- 973.7.22 Gate - self-closing Every gate in a swimming pool enclosure shall be self-closing
- 973.7.24 Gate - climbing - prevented - exterior construction Every gate in a swimming pool enclosure shall not have any member or attachment that would facilitate the climbing of the gate
- 973.7.25 Construction - chain - wood - minimum requirement Every fence around a swimming pool shall be constructed as follows
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of a public bylaw PDF. The official PDF governs.