Richmond Hill : Règlement no 973, art. 973.7.23 — Gate - self-latching - from interior - height Every gate in a swimming pool enclosure shall be equipped with a lockable self-latching device located on the interior face near the top of the gate or on the exterior face provided it is at least 1.5 m (4.9 ft.) above grade
Vérifié le
Texte indexé
Gate - self-latching - from interior - height Every gate in a swimming pool enclosure shall be equipped with a lockable self-latching device located on the interior face near the top of the gate or on the exterior face provided it is at least 1.5 m (4.9 ft.) above grade.
Extrait court. Le reste du texte est sur la source officielle.
Source officielle · Table des matières
Sujets
Articles voisins
- 973.7.21 Gate - clearance - requirements A clearance of 100 mm (3.9 in.) is permitted under gates where a hard surface such as concrete, asphalt, paving stones or patio slabs extends for a distance of 0.5 m (2 in.) on each side of the gate
- 973.7.22 Gate - self-closing Every gate in a swimming pool enclosure shall be self-closing
- 973.7.24 Gate - climbing - prevented - exterior construction Every gate in a swimming pool enclosure shall not have any member or attachment that would facilitate the climbing of the gate
- 973.7.25 Construction - chain - wood - minimum requirement Every fence around a swimming pool shall be constructed as follows
Autres villes
Pour signaler une correction : info@bylawinsider.com. Ce lien ouvre votre programme de courriel.
Copie non officielle, pour faciliter la lecture. La version officielle prévaut. Source officielle
Short excerpts of a public bylaw PDF. The official PDF governs.