Markham By-law 2015-96, s. 9.1 — Pool Enclosure By-law
Pool Enclosure By-law
Last checked
Indexed text
Every gate in an Enclosure shall be supported on hinges substantial enough to hold the weight of the gate and shall be constructed in accordance with the requirements of subsections 8.2, 8.3, 8.4 or 8.5 and be equipped with a self-closing device and a lockable Self-Latching Device located on the interior face near the top of the gate. 9.2 Metal gates used in an Enclosure shall be equipped with a Covering Plate Device, a minimum of 0.3 m (12 in.) x 0.3 m (12 in.) size, covering the latching device from the outside of the gate. The covering plate device shall be a minimum thickness of 6.3 mm (¼” in.).
Short excerpt. The rest of the text is on the official source.
Official source · Table of contents
Related sections
- 8.5
- 9.0 Construction of Gates By-law 2015-96
- 9.3 Double gates used in an Enclosure shall have one of the two gates equipped with a Self-Closing Device and a Self-Latching Device to provide access. The other gate shall have a securing device permanently affixed to the ground or other non-moveable object, which prevents access through this gate without lifting or removing this device and then releasing the latch. This gate must be securely closed unless open for access and supervised to prevent unauthorized access to the Pool area
- 10.0 Special Provisions and Partial Exemptions
Other cities
To report a correction: info@bylawinsider.com. This link opens your mail program.
Unofficial copy for convenience; the official version governs. Official source
Short excerpts of a public bylaw PDF. The official PDF governs.